PTFE Coating Service

PTFE Coating Service .

PTFE coatings are non-stick fluoropolymer coatings, which have very high operating temperature, exceptionally low coefficient of friction, good chemical resistance and abrasion resistance. They are ideal for numerous applications in different areas. A popular use of these coatings is: cookware, and other allied non-stick applications. We provide PTFE Coating Service, Commercial Coating Service for a wide range of industrial components. They utilize a two coat (primer/topcoat) system. Also, we keep up with large volumes, short runs and cost-effective techniques. With our expertise, we can create custom solutions depending on the required performance and application.

PTFE coating is one of the world’s most sought after non-stick products.The PTFE coating process has outstanding release capabilities and can withstand a maximum use temperature of 600°F, higher than any fluoropolymer. This coating is typically applied to a thickness of 1-3 mils.

Features & Benefits: :

  • Easy assembly & removal
  • High heat resistance
  • Low coefficient of friction
  • Excellent release capabilities and withstand extreme temperatures
  • Good corrosion resistance and chemical resistance
  • Suitable for a wide range of parts & components

  • PTFE Coating Statistics

    Tensile Strength (ASTM D1708) 3000-5000 psi
    Elongation (ASTM D1457) 300-500%
    Impact Strength (ASTM D256) 3.5 ft-LB/in
    Hardness (ASTM D2240) 50-65 HB (shore D)
    Abrasion Resistance (Tabor) 12 mg
    Coefficient of Friction (ASTM D1894) 12 -.15 static, .05 -.10 dynamic
    Dielectric Strength (ASTM D149) 450 volts per mil
    Use Temperature 600°F max
    Melting Point 625°F
    Thermal Conductivity 1.7 BTU-in/h-ft 2-°F
    Chemical Resistance (ASTM D543) Excellent
    Salt Spray Resistance (ASTM B117) Fair
    Water Absorption (ASTM D570) < .01%
    Thickness .001" - .003"