PTFE Coating Service
 
PTFE Coating Service .
PTFE coatings are non-stick fluoropolymer coatings, which have very high operating temperature, exceptionally low coefficient of friction, good chemical resistance and abrasion resistance. They are ideal for numerous applications in different areas. A popular use of these coatings is: cookware, and other allied non-stick applications. We provide PTFE Coating Service, Commercial Coating Service for a wide range of industrial components. They utilize a two coat (primer/topcoat) system. Also, we keep up with large volumes, short runs and cost-effective techniques. With our expertise, we can create custom solutions depending on the required performance and application.
PTFE coating is one of the world’s most sought after non-stick products.The PTFE coating process has outstanding release capabilities and can withstand a maximum use temperature of 600°F, higher than any fluoropolymer. This coating is typically applied to a thickness of 1-3 mils.
Features & Benefits: :
Easy assembly & removal
High heat resistance
Low coefficient of friction
Excellent release capabilities and withstand extreme temperatures
Good corrosion resistance and chemical resistance
Suitable for a wide range of parts & components
PTFE Coating Statistics
|
Tensile Strength (ASTM D1708) |
3000-5000 psi |
|
Elongation (ASTM D1457) |
300-500% |
|
Impact Strength (ASTM D256) |
3.5 ft-LB/in |
|
Hardness (ASTM D2240) |
50-65 HB (shore D) |
|
Abrasion Resistance (Tabor) |
12 mg |
|
Coefficient of Friction (ASTM D1894) |
12 -.15 static, .05 -.10 dynamic |
|
Dielectric Strength (ASTM D149) |
450 volts per mil |
|
Use Temperature |
600°F max |
|
Melting Point |
625°F |
|
Thermal Conductivity |
1.7 BTU-in/h-ft 2-°F |
|
Chemical Resistance (ASTM D543) |
Excellent |
|
Salt Spray Resistance (ASTM B117) |
Fair |
|
Water Absorption (ASTM D570) |
< .01% |
|
Thickness |
.001" - .003" |
.
|